The remote button station control types, or button configuration can be set to different types of functions.
Activates a scene, or otherwise sets level to 100% if controlling Intensity.
Activates a scene, or otherwise sets level to 0% if controlling Intensity.
Sends level of 100% when status LEDs are OFF and 0% when status LEDs are ON
Starts ramping up controlled level from current level when pressed, stops ramping when released.
Starts ramping down controlled level from current level when pressed, stops ramping when released.
Acts as Toggle when the button is pressed and released within 0.5 seconds; if the button is pressed and held for >0.5s acts as Raise. If the button is released and then pressed and held again within 28 seconds of the last button press, it will act as Lower. After 28s, it will revert to Raise type when pressed and held if the status LEDs are not ON.
This option is only available when the control type is set to Link. If the toggle option is specified when the control type is set to Link, the toggle behavior will Link and Unlink the rooms on each button press.