Follow

Fresco is constantly restarting

Check power supply

If the Fresco is constantly restarting, check power supply to see if it is damaged or correct voltage requirements, and general wiring.

Check programming files

  1. Backup the BIN folder: Connect to the Fresco by mico-usb and attempt to copy the BIN folder contents off of the Fresco temporarily. 
  2. Remove the BIN folder. Once the contents of your programming are saved. Delete the BIN folder on the Fresco drive.
  3. Unplug or power-cycle the Fresco and check if it starts up normally. The programming files may have been corrupted or bad data.
  4. If it appears there was bad data, try reprogramming the Fresco.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request