Programming Photocells

When programming ADC photocells you want to enable "follow photocell mode" on the photocell itself. This allows the 0-10v dimming wires to track the photocell they come from. 

When programming ADCX photocells you only need to enable "follow photocell mode" on the dimming devices and make sure that the photocell and dimming device are broadcasting and tracking the same channel. 

When programming on/off photocells 'follow photocell mode" is not required as the photocell commands are sent directly through photocell broadcast/tracking channels. 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request