When programming loads to stay on 24 h ours everyday then use a Schedule to turn ON a Momentary ON group.


You will be using a Momentary group which only triggers on the ON TIME of a schedule, but always set the OFF TIME in the schedule. The time of day is not particularly important this schedule is mainly to ensure that the loads are turned back on in case someone has turned them off.  



  1. From User Menu/Review Schedule/pick an unused schedule/Except None/Everyday/set both ON & OFF times. (The times that are set are not important but both need to be set)/Exit/Enter on “Yes” to save.


  1. From the schedule you just saved Tab Down once you will be on NO LOADS from there Scroll Up to an unused group and Enter the group and set it to Momentary ON and add you loads.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request