Follow

GR2400 - Adding/Deleting Relays from a Zone

The following article gives you step-by-step instructions on how to add or delete relays from a zone.

 

Adding relays to a zone:

  1. Push the Assign button once and it will light up.
  2. Push the zone button in to which you want to add relays. The LED for that zone will light up, along with any relays that may already be in that zone.
  3. Push the buttons corresponding to the relays you want to add to the zone.
  4. Once you have added all the relays you want in a particular zone, the LEDs for all those relays should be lit up.
  5. Push the Assign button again and the Assign LED will turn off. The online LED will start blinking rapidly to indicate that the panel is in the process of
  6. being programmed.

Your relays have now been added to the zone of your choice.

Important Note: You can not have relays in more than one zone therefore, when you are adding a relay to a zone and the LED for the relay starts blinking, it is an indication that the relay is already in another zone.

 

 

Deleting relays from a zone:

  1. Push the Assign button once and it will light up.
  2. Push the zone button from which you want to delete relays. The LED for that zone will light up, along with any relays that may already be in that
  3. zone.
  4. Push the buttons corresponding to the relays you want to delete from the zone.
  5. Once you have deleted all the relays from that particular zone, the LEDs for all those relays should be off
  6. Push the Assign button again and the Assign LED will turn off. The online LED will start blinking rapidly to indicate that the panel is in the process of
  7. being programmed.

Your relays have now been deleted from the zone of your choice.

 

 

Viewing what relays are in a zone:

  1. Push the Assign button once and it will light up.
  2. Push the zone button, and the LED for that zone will light up

The LEDs for all the relays in that zone will light up. If you do not wish to make any changes, do no push any buttons and the Assign LED will turn off in 5 seconds.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.