Follow

Occupancy Sensor Troubleshooting--iDIM iDH Cards

When troubleshooting the iDIM or iDH cards, it is always essential to find out if the issue is with the occupancy sensor or the micropanel.  In this situation, one must realize that an occupancy sensor with an internal relay operates by closing two points via a relay.
To simulate this, we connect the scene wire that connects to the occupancy sensor in question to the ground wire.  When the two connect, the scene should activate as it is programmed.  When the connection is broken, the scene will stop, if the scene activates then the problem is the occupancy sensor or the wiring not the micropanel. .

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request