How to remove an nLight device from the nBACnet mapping through SensorView


    1. In SensorView from the BACnet tab:
      • Select the nBACnet unit from the middle column
      • Search for the device using the device ids above
      • Uncheck the box next to the device(s)
      • Select Save (Right Panel next to the nBACnet name)
      • Go to the Devices tab
      • Select the Gateway
      • Select Rediscover
    2. This will cause the bacnet xml to update. The nBACnet unit will read this XML the next time it performs a device discover (default is 15 minutes)


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request