Can Fresco display the nLight firmware version?

Fresco lists the firmware and hardware version information on the nLight device tab for nLight devices connected to the respective Fresco.

The version information is formatted as following: 'FXXX-XXXX Z###' whereby the F component is the hardware version and the Z component is the firmware version.

This functionality is available in firmware 2.0+.

Earlier versions of firmware this was not directly possible and an nCOMMKit and SensorView were required to retrieve the firmware version number of nLight devices connected to the Fresco.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request