Follow

Lighting state is not saved on power loss

Fresco firmware versions previous to 112 such as 111 or earlier did not capture the lighting state during an uncontrolled power loss (unexpected) event or during a controlled reset such as user intentionally resetting the unit through menu option.

Instead the lights would cycle off and back on during the Fresco startup.

The lighting state is restored with Fresco firmware version 112+. The lighting state is resumed to the previous light intensity for zones, color temperature, and color.

If there are many zones however, all of the zone states may not be restored due to the time during power loss to save the lighting state.

Note: Power loss through the side pinhole reset button is not a controlled power loss event and will not attempt to save the lighting state.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request